• Mon - Fri : 08.00 - 16.30

Fire-Gard Roller Shutter Doors

Fire Rated Roller Shutter Doors.

Our fire-gard doors are face-fixed, fire resisting roller shutter & insulated doors, that are tested and assessed by the LPC Borehamwood to provide up to 4 hours fire protection. In terms of integrity and stability, up to a maximum opening size of 10 meters wide x 10 meters high, all in accordance with BS476 part 22 1987. Single shutters have been specifically developed to fit directly to the face of conventionally formed openings. All Fire-Gard doors are available in powder coated finish and available in the below different operating mechanisms:

  • Self coiling – operates with push-up & pull-down motion
  • Electric operated – operates using a fire motor unit with 240v or 440v

Fire-Roller-Door-Image-2--300x225
Fire-Roller-Shutter-Door-image-1---300x325

Specifications

Technical Specifications
Curtains75mm Galvanised finish steel interlocking laths with end-locks to prevent lateral movement.
Bottom RailA strong roll formed bottom rail 1.6mm thick fitted to bottom of the curtain.
RollerHeavy-duty seamless tube and mounted between supporting head plates.
GuidesGalvanised steel roller angle and folded steel channel guides bolted to roller plates and building structure
Operation24 Volt DC motor with audio visual panel, 96 hour battery backup, Delay before closure and two stage closing, Auto and manual reset & volt free alarm connection.
FinishGalvanised or Powder coated ( any colour from our standard range)
Fire Rating30mins, 60mins, 120mins or 240mins
Available Extras
The curtain, guides, fixing angles, end plates, and hood to be powder coated any colour from our standard RAL range.
If the shutter is the only means of exit from the building we would strongly recommend that a push button control is installed on the inside to prevent trapping.

Note: All fire doors are constructed in accordance with: BS EN 1634-1 and BS 476 part 22 1987

Other Roller Shutter Products

|